Application

Voltage	240 VAC
Configuration	3 Ø / 3 Wire

Characteristics

Fusing	Buss 5 Amp 250V AGC-5
Indication	Normally Off Neon Lights
Conductor	14 AWG Stranded
Markings	Silk Screened
Enclosure	NEMA Type 2

Certifications

Listing	ETL-EU IEC 61643-11
Environmental	RoHS

Diagram

Approximate Size (H x W x D) 7” x 3.5“ x 4”

inches
[millimeters]

Specifications

Modes of Protection	L-L
Type (Class)	2 (2)
Nominal Discharge Current	2 kA
Clamp Voltage	780
VPL [Up]	1360
SCCR	10 kA
MCOV	500
Operating Temperature	-40C to 85C
Operating Humidity	1% to 95%
Filtering	UL 1283
EMI-RFI Noise Attenuation	< 40 db
Capacitance	1 to 1.5 uF / Line
Component Response Time	< 1 ns
Rated Power Dissipation	<1 W / Line
Frequency Range	50 - 400 HZ
Degree of Protection	IP 20

Standard Installation Summary

Install According To Instructions Provided With Device

1. Remove 1/2” knockout.
2. Mount using mounting feet with proper anchors.
3. Connect one red conductor to phase A.
4. Connect other red conductor to phase B.
5. Connect last red conductor to phase C. 
6. Install fuses.

Note: Breaker Size 15 amp (if required).
Note: Never add length to provided conductors.
Note: For optimum SPD performance minimize conductor length and avoid sharp bends.

MAXIVOLT
Serious Surge Protection®
MV Series
Made in the USA
Download Data Sheet
View Our Catalog
How to Buy
Installation, Operation, & Maintenance Manual
Warranty

Get in touch with Maxivolt

First Name*

Last Name*

Company Name

Phone Number*

Email Address*

Questions & Comments*

You can also reach us by phone or email 1-800-583-4773 info@maxivolt.com